high-performance, vapor permeable, strong adherence to the
exterior (and interior decorative fronts feature can also be
Usage: Fine plaster, concrete or plaster to properly handle
themselves silicate or acrylic painted surfaces to renew the old
plates or polystyrene and mineral wool thermal insulation
systems are used on safely administered.
Physical and Chemical Properties:
Appearance: Opaque, grain texture.
Color: any color can be produced in the required and
Drying Time (20 C): Touch Duration: 24 hours
Full Drying time: 2-3 days
Covering Power: 3.5 kg/m2
Method of Application: plastic or polyurethane can be applied
with a trowel.
Fire Hazard Class: None.
Harmful to health: None.
Storage: The material must be protected from frost and excessive
Infrastructure firm, clean, oil-free, and the new stucco should
be taken outlet. The decor is used plaster coating thermal
insulation systems, thermal insulation plaster is applied one
week after the application started.
Application: The bucket is thoroughly mixed in the material
started to implement a low-speed drill. Plastic or polyurethane
applied to the surface with a trowel and a thick layer of
product to get the particle is more material from the surface.
After applying a homogeneous manner float in a circular motion
pattern is pressed. Given pattern is often stripped trowel.
The lack of difference in the pattern of the same type to the
same surface with a trowel studied.