Description: PVA-based, plastic
paint a final coat of economic performance.
Usage: used in dyeing the inside of buildings, plaster or
Physical and Chemical Properties:
Color: any color can be produced in the required and
Brightness: 4.0 (60 Glossmeter)
Solid content%: 60.0 + 1.0
Density: 1.49 g/cm3
Viscosity: 30 to 40 P
Drying Time (20 C): Touch Duration: 30-60 min.
Full Cure Time: 10 hours
Covering Power: 0.150 kg/m2 (one coat).
Method of Application: Brush, roller or spray gun can be
Recoat time: 12 hours
Fire Hazard Class: None.
Harmful to health: None.
Storage: The material must be protected from frost and excessive
Infrastructure sound, clean, free of grease. Gaps and cracks on
the surface to be leveled and filled with acrylic sealant.
Thin-plastered surfaces, concrete and asbestos cement plastered
surfaces or plaster surfaces, gas concrete surfaces (the
infrastructure to satiety) life must be primed with acrylic
Robust, non-blistered surfaces or surface coatings, paint
remover or mechanically removed and washed thoroughly. Law that
must be primed with acrylic primer.
Synthetic painted surfaces are wiped with a 10% ammonia solution
and rinsed with water until matt or sanding. Law that must be
primed with acrylic primer.
Surfaces with wallpapers, wallpaper of the intricate solid,
swollen completely removed. Law that must be primed with acrylic
Yasan surface corrections made necessary primed surfaces
Ecoplast apply 1 coat of plastic paint thinned with 20% water.
10% of Plastic Paint Yasan Ecoplast final coat is diluted with
- See more at: