high quality topcoat.
Usage: used in dyeing the inside of buildings, plaster or
Physical and Chemical Properties:
Color: any color can be produced in the required and
Brightness: 4.0 (60 Glossmeter)
Solid content%: 56.0 + 1.0
Density: 1.45 g/cm3
PH: 7,5 - 10
Viscosity: 85 KU
Drying Time (20 C): Touch Duration: 30-60 min.
Full Cure Time: 10 hours
Covering Power: 0.150 kg/m2 (one coat).
Method of Application: Brush, roller or spray gun can be
Recoat time: 12 hours
Storage: The material must be protected from frost and excessive
Fire Hazard Class: None.
Harmful to health: None.
Infrastructure sound, clean, free of grease. Surface voids and
cracks in the acrylic paste
Should be filled and leveled with.
Thin-plastered surfaces, concrete and asbestos cement plastered
surfaces or plaster surfaces, gas concrete surfaces (the
infrastructure to satiety) life must be primed with acrylic
Robust, non-blistered surfaces or surface coatings, paint
remover or mechanically removed and washed thoroughly. Law that
must be primed with acrylic primer.
Synthetic painted surfaces are wiped with a 10% ammonia solution
and rinsed with water until matt or sanding. Law that must be
primed with acrylic primer.
Wall surfaces are wrapped in papers, wall paper in the intricate
solid, swollen completely removed. Law that must be primed with
Moonlight surface corrections made necessary primed surfaces
Yasan apply 1 coat of plastic paint thinned with 20% water. 10%
of Plastic Paint Moonlight Yasan final coat is diluted with
- See more at: